Technical
Wireless Printing Freedom: Using HP Printers on Linux
A comprehensive guide to setting up HP DeskJet, OfficeJet, and LaserJet printers on Linux using HPLIP, including wireless configuration and scanning.
Read time: 3mRead Article →
The Archive.
17 Articles Found // Indexing Complete
Technical
Goodbye Copilot: Running Llama 3 & Qwen-Coder Locally on an RTX 3090
Stop sending your code to the cloud. Learn how to leverage an RTX 3090, Ollama, and OpenCode to build a private, lightning-fast AI coding assistant using Llama 3 and Qwen2.5-Coder.
Read time: 4mRead Article →
Technical
Glove80: Was it worth it after 2 years?
A look back at two years with the Glove80 split ergonomic keyboard. From the initial struggle of learning a columnar layout to the breakthrough of per-key RGB, here is why there's no going back.
Read time: 3mRead Article →
Technical
Building the Ploopy Adept BLE (Any Ball Mod)
A comprehensive guide on how to build a wireless Ploopy Adept trackball, featuring the highly recommended Any Ball mod, ordering the PCB, and assembling the components.
Read time: 6mRead Article →
Technical
Securely Running OpenClaw with Ollama via Tailscale
OpenClaw is a powerful AI agent, but giving it full host access can be risky. Learn how to run OpenClaw securely with Ollama by leveraging Tailscale to restrict access to a single port, while keeping your home network safe.
Read time: 5mRead Article →
Technical
The Invisible Key: Understanding Keyless Entry Relay Attacks
Learn how keyless entry relay attacks work using an SDR and a Raspberry Pi, and discover practical ways to protect your vehicle.
Read time: 4mRead Article →
Technical
How to Access Raspberry Pi GPIO Pins Inside a Docker Container
Trying to control your Raspberry Pi's GPIO pins from inside a Docker container? Here is the quick solution using docker-compose and /dev/gpiomem.
Read time: 3mRead Article →
Technical
Glove 80 - Per-Key Coloring
The Glove 80 is a mechanical keyboard with per-key RGB lighting. In this post we will explore how to set the colors of the keys.
Read time: 3mRead Article →
Technical
Pwned: My Step-by-Step Walkthrough of THM Pickle Rick
Pickle Rick room on TryHackMe is a easy Rick and Morty themed room suitable for beginners.
Read time: 5mRead Article →
Technical
How to deploy a next.js application on docker hub
Explore how to deploy a next.js application on docker hub.
Read time: 3mRead Article →
Technical
Mastering Next.js Content: A Deep Dive into Static MDX Blogs
Explore how to create a next.js blog application with markdown support and static generation at build time.
Read time: 6mRead Article →
Technical
Mastering Next.js Routing: From Pages to Dynamic Segments
In this post we will explore how to with a next.js application to add pages, support routing and dynamic routes.
Read time: 5mRead Article →
Technical
How to create a next.js application with create-next-app
In this post we will explore how to create a next.js application using create next app.
Read time: 2mRead Article →
Technical
Relevant TryHackMe Write-Up
Relevant is a challenging room on TryHackMe that puts you in the role of a penetration tester, tasked with conducting a penetration test and delivering a detailed report.
Read time: 14mRead Article →
Technical
Overpass 2 - Hacked TryHackMe Write-Up
Overpass 2 is a hard room featuring a hacked webserver which requires us to retrace the steps of the hacker to gain back access.
Read time: 5mRead Article →
Technical
Internal TryHackMe Write-Up
The Internal room on TryHackMe is an hard challenge that let's you slip in the role of a penetration tester, where your objective is to perform a thorough penetration test
Read time: 16mRead Article →
Technical
Daily Bugle TryHackMe Write-Up
The Daily Bugle room on TryHackMe is a hard room that requires you to compromise a Joomla CMS account.
Read time: 6mRead Article →